Skip to content
Chargepros

Get $100 off your EV charger installation

Cutler Bay, Miami-Dade County

EV charger installation in Cutler Bay, FL.

Home chargers, condo and commercial charging, and repairs in Cutler Bay. Every charger brand and every EV, with the permit, the install and the inspection handled, and updates at every step.

Example quote: Tesla Wall Connector in a Cutler Bay garage

  • Tesla Wall ConnectorYou save $16 vs MSRP$585$569
  • InstallationPanel within 10 feet of the charger$650
  • Permit, inspection and load calculationIf your city requires it$500
  • Online booking discount−$100
  • Permit discount−$50
Example total$1,569

Or about $72/month with Wisetack financing (24 months at 9.9% APR, subject to approval).

An example only: your quote depends on your home, your charger and your city. Utility rebates, like Duke Energy’s, are paid to you separately, and we help you apply. Permits run $350–$500 where required.

Every install

What’s included in Cutler Bay.

Background-checked, trained and experienced technicians, led by licensed electricians.
  • A new breakerSized for your charger, in your panel, after a load calculation.
  • New wiring and conduitA dedicated circuit from the panel to the charger, protected the whole way.
  • Your charger, where you want itMounted at the spot that suits your car, your cable and your parking.
  • Activated and set upConnected to Wi-Fi and its app where it has one, with the right amps programmed.
  • Tested on your carWe charge your EV, if it’s there, to make sure everything works before we leave.
  • Permit and inspectionWhere your city requires one, filed, tracked and inspected, with a photo report.

Send a photo of your panel and where you want the charger.

A picture or short video helps us find the best option and configuration for you. We can often get started this week.

Text (786) 232-3115

Permits

EV charger permits in Cutler Bay.

  1. 1

    Who issues it

    Permits are issued by the City of Cutler Bay’s building department, or Miami-Dade County in unincorporated areas.

  2. 2

    What we file

    The electrical permit application, the load calculation and the charger’s specifications.

  3. 3

    Inspection

    An inspector checks the circuit and the charger. We schedule it and are there for it.

  4. 4

    Timing

    From a few days to a few weeks, depending on the office. We track it and keep you updated.

Permits run $350–$500 where required. Miami-Dade County is in Florida’s High-Velocity Hurricane Zone, so exterior equipment and wall penetrations are planned to those stricter code provisions. Cited for a charger without a permit? We can help.

Utility programs

Programs for Cutler Bay drivers.

Florida Power & Light (FPL) serves Cutler Bay at the city level. Programs are paid or run by the utility, never subtracted from our price, and we help with the paperwork.

Our work

The same standard on every job.

In Cutler Bay and everywhere we work: licensed electricians, a permit and inspection where required, and a photo report when we finish.
Tesla Wall Connector on a house wall beside a Tesla Model Y parked in the driveway
Charging in the driveway
Tesla Wall Connector mounted outdoors with a disconnect switch and conduit
Tesla Wall Connector, outdoors
FPL EVolution Home charger by Enel X Way mounted in a garage
An FPL EVolution Home charger
Close-up of a Tesla Wall Connector with its cable neatly coiled
Tesla Wall Connector

Reviews

What Florida drivers say.

“Great experience with Chargepros! The EV charger installation was smooth and professional. … I also appreciate their follow-up to make sure I was satisfied with the service. Highly recommend!”
Baraa S., Google review
“Great Service. Took care of everything including permits.”
Rayvel J., Google review
Read all 1,250+ reviews on Google

Questions

Cutler Bay questions.

How much does EV charger installation cost in Cutler Bay?

Most Cutler Bay garages come to about $1,300–$2,700 all in, with the charger, installation and permit. Longer runs or panel work cost more. Our quote tool gives your exact price in about 3 minutes.

Do I need a permit for an EV charger in Cutler Bay?

In most cases, yes. Permits are issued by the City of Cutler Bay’s building department, or Miami-Dade County in unincorporated areas. We prepare and file it, schedule the inspection and are there for it. Permits run $350–$500 where required.

Which utility serves Cutler Bay, and are there programs?

Florida Power & Light (FPL) serves Cutler Bay at the city level; exact addresses can differ. FPL customers can choose FPL EVolution; we’re program installers.

How long does installation take in Cutler Bay?

Most installs take a few hours once any permit is approved. Permit times vary by city; we track it and keep you updated.

Your Cutler Bay price, in three minutes.

No home visit to start, and $100 off your installation when you book online.

Get my price Call